Payment & Shipping Terms:
|Application:||Laser Cutting||Max Travel Speed:||60m/min|
|Wavelength:||1064nm||Z Axis Route:||120mm|
|X Axis Route:||3000mm||Y Axis Route:||1500mm|
Metal Fiber Laser Cutter,
CNC Laser Cutting Machine
Fiber laser machine collocates with the advanced laser generator which emits laser beam with high energy density. The laser beam is focused on the surface of workpiece as an ultrafine focus facula and causes the irradiated area instantly melted and vaporized. The CNC system automatically controls the laser cutter to achieve the cutting mission.
The laser equipment is constituted with the advanced laser technology, CNC technology and mechanical technology. It's applicable to processing metal sheets such as stainless steel, carbon steel, copper, aluminum and metal pipes. It has been widely used in plate processing, machinery manufacturing, and precision processing, etc.
1. Great Performance: Identical cutting quality on any cutting point is realized through fiber transmission.
2. High Efficiency: The rapid cutting speed is two times higher than that of CO2 laser machine. Its use-cost is very low.
3. Low Consumption of Gas: Laser cutting does not make any gas because of the specific cutting technology on steel plate.
4. Low Consumption: It is environment-protecting and energy-saving, power consumption is reduced by 20%-30% compared with CO2 laser.
5. Maintenance-free: The machine is maintenance-free, there is almost no any parts need to change after long term use.
Big Scale 3015 Fiber Laser Metal Cutting Machine is professional for stainless steel, carbon steel as well as other metal sheet cut, widely used in metal cutting, electrical switch manufacturing, aerospace, food machinery, textile machinery, engineering machinery, locomotive manufacturing, agriculture and forestry machinery, elevator manufacture, special vehicles, houshold appliances, toos, processing, IT manufacturing, oil machinery, food machinery, diamond tools, welding, welding gear, metal materials, decoration adverting, laser surface treatment of foreign processing services, such as all kinds of machinery processing industry.
|Laser Power||700W Racus fiber power source|
|Laser Wave Length||1064nm|
|Working Table||Saw tooth|
|Maximum Idle Running Speed||1400mm/s|
|Minimum Line Width||± 0.02mm|
|Position Type||red dot|
|Working Voltage||380V/50Hz, three phase|
|Working life of fiber module||More than 100000 hours|
|Fiber laser cutting head||Lasermech made in USA|
|Focus lens||Lasermech made in USA|
|Driver system||1500W servo motor made in Japan|
|Liner guider system||PMI H series linear guide made in Taiwan ,|
|Transmit system||Dual Rack & Pinion type|
|Rack system||Herion made in Germany|
|Chain system||Igus made in Germany|
|Warranty time||Whole machine for 3 years (fiber module 2 years )|
1. Standard plywood case, its compressive strength and bearing quality is better.
2. the board area is bit, the soil structure is good, it is better in leakproofness and waterproof.
3. when importing, the plywood case is with fumigation-free, the procedure is simple.
4. Delivery Detail: within 20-25 days after received your payment.